The Biomechanical Performance of Implant Screws with Different Biomaterials in Orthopedic Bone Fixation Procedures

Basit Öğe Kaydı
dc.authoridGok, Arif/0000-0003-2840-9601
dc.contributor.authorGok, Kadir
dc.contributor.authorGok, Arif
dc.date.accessioned2025-03-20T09:51:20Z
dc.date.available2025-03-20T09:51:20Z
dc.date.issued2024
dc.departmentİzmir Bakırçay Üniversitesi
dc.description.abstractThis study aimed to investigate the bone screwing process for stabilization following reduction of femur shaft fracture using M3.5 cortex screws made of four different materials: 316L stainless steel, Ti6Al4V, NiTi, and WC. The numerical analysis was performed using the finite element method and Deform-3D software, with loading and boundary conditions being accurately identified for each analysis. The screwing moment, screw wear, and temperature distributions in both the screw and bone material were evaluated for each material during the screwing process. The results showed that the lowest bone temperatures were achieved when using WC screws, followed by 316L, Ti6Al4V, and NiTi screws. The numerical simulations demonstrated good consistency across all four screw materials during the bone screwing process. The study used Finite Element Analysis to simulate screw insertion into sawbones. It employed tetrahedral elements for meshing, focusing on the hole area to mimic screwing accurately. Sawbones' lateral surfaces remained fixed, while the screw model experienced different spindle speeds and a constant feed rate. Contact between screw and sawbones was established using a master-slave algorithm, considering a friction coefficient of 0.42 to simulate frictional forces.
dc.identifier.doi10.1007/s12666-024-03371-3
dc.identifier.endpage2717
dc.identifier.issn0972-2815
dc.identifier.issn0975-1645
dc.identifier.issue9
dc.identifier.scopus2-s2.0-85195314459
dc.identifier.scopusqualityQ2
dc.identifier.startpage2711
dc.identifier.urihttps://doi.org/10.1007/s12666-024-03371-3
dc.identifier.urihttps://hdl.handle.net/20.500.14034/2480
dc.identifier.volume77
dc.identifier.wosWOS:001243272500003
dc.identifier.wosqualityQ3
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherSpringer India
dc.relation.ispartofTransactions of The Indian Institute of Metals
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzKA_WOS_20250319
dc.subjectBiomaterials
dc.subjectOrthopedic surgery
dc.subjectBone screwing
dc.subjectFinite element analysis
dc.titleThe Biomechanical Performance of Implant Screws with Different Biomaterials in Orthopedic Bone Fixation Procedures
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu