The optimization of driller parameters for orthopedic surgery applications using multiobjective gray relational analysis and response surface method

Basit Öğe Kaydı
dc.contributor.authorGök, Arif
dc.contributor.authorGök, Kadir
dc.contributor.authorAlkan, Mehmet Ali
dc.date.accessioned2023-03-22T19:47:39Z
dc.date.available2023-03-22T19:47:39Z
dc.date.issued2022
dc.departmentBelirleneceken_US
dc.description.abstractIn bone-drilling operations, undesirable temperature rises are experienced due to high-contact friction. These increases in temperature can damage bone and soft tissues from time to time. When the temperature exceeds 47 degrees C, osteonecrosis occurs. This article presents a new method for both the selection of optimum drilling parameters and the mathematical temperature model (T degrees C). In this study, the optimum parameter values for bone-drilling operations were found using gray relational analysis, and a mathematical model was created based on the temperature parameters using the response surface method. The accuracy of the developed analytical model has been proven by ANOVA. As a result, it has been revealed that the value of spindle speed is the most effective factor in bone-drilling operations and that the developed analytical model and experimental measurements are in harmony.en_US
dc.identifier.doi10.1142/S021951942250021X
dc.identifier.issn0219-5194
dc.identifier.issn1793-6810
dc.identifier.issue4en_US
dc.identifier.urihttps://doi.org/10.1142/S021951942250021X
dc.identifier.urihttps://hdl.handle.net/20.500.14034/808
dc.identifier.volume22en_US
dc.identifier.wosWOS:000776052800004en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.language.isoenen_US
dc.publisherWorld Scientific Publ Co Pte Ltden_US
dc.relation.journalJournal Of Mechanics In Medicine And Biologyen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectBone drillingen_US
dc.subjectanalytic modelen_US
dc.subjectGRAen_US
dc.subjectRSMen_US
dc.subjectANOVAen_US
dc.subjectTaguchi Methoden_US
dc.subjectBoneen_US
dc.subjectMinimizationen_US
dc.subjectRoughnessen_US
dc.subjectEdmen_US
dc.titleThe optimization of driller parameters for orthopedic surgery applications using multiobjective gray relational analysis and response surface methoden_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Biyomedikal Mühendisliği Bölümü Koleksiyonu