Kafes yapılı konsol kirişin yapısal kullanımına yönelik ilk adımlar: System identification, modal ve yapısal analiz

dc.contributor.authorDokuz, Muhammed Enes
dc.contributor.authorGök, Kadir
dc.contributor.authorÇaşka, Serkan
dc.date.accessioned2025-03-21T07:38:11Z
dc.date.available2025-03-21T07:38:11Z
dc.date.issued2024
dc.departmentİzmir Bakırçay Üniversitesi
dc.description.abstractKafes yapılı malzemeler birçok mühendislik alanında kullanılmaktadır. Ancak kafes yapılı kirişlerin dinamik ve statik analizini içeren çalışmalar literatürde yaygın değildir. Bu çalışmada kafes yapısına sahip üç tip konsol kiriş nTopology programında 3 boyutlu olarak tasarlanıp Ansys yazılımında analizleri yapılmıştır. Kirişlerin tasarımında kare döndürülmüş, altıgen ve üçgen tipi kafes yapıları kullanılmıştır. Her bir kirişe 10 Kilonewton kuvvet uygulanarak kirişlerin serbest uç kısmında meydana gelen yer değiştirmeler kaydedilmiştir. Kirişlerin titreşimine ait giriş ve çıkış veri seti kullanılarak ayrık zaman transfer fonksiyonu modelleri, ayrık zaman durum uzayı modelleri ve doğrusal olmayan Ekstra Girişli Otoregresif modeller elde edildi. Modellerin elde edilmesi için MATLAB'ın Sistem Tanımlama Araç Kutusu kullanıldı. Ayrıca kirişlerin modal analizi ve statik analizi gerçekleştirilmiştir. Sistem tanımlama, modal analiz ve statik analize ait sonuçlar şekiller halinde gösterilmiş, tablolar halinde sunulmuş ve tartışılmıştır. Kafes olmayan kirişten sonra en düşük spesifik deformasyon üçgen kafes kirişte meydana geldi. Bu nedenle üçgen kafes yapısı, saf eğilme durumundaki yapı elemanları için umut verici sonuçlar verdi.
dc.description.abstractMaterials with lattice structure have been used in many engineering fields. However, studies including dynamic and static analysis of lattice structured beams are not common in literature. In this study, three types of cantilever beams with lattice structure were designed as 3 Dimensionally in nTopology software and analyzed in Ansys software. Square rotated, hexagonal and triangular type lattice structures were used in design of the beams. 10 Kilonewton force were applied to each beam and the displacements that were occurred at the free end side of the beams were recorded. Discrete time transfer function models, discrete time state space models and nonlinear Autoregressive with Extra Input models were obtained using input and output data set belongs to vibration of the beams. System Identification Toolbox of MATLAB was used to obtain the models. In addition, modal analysis and static analysis of the beams were realized. The results belong to system identification, modal analysis and static analysis were illustrated in figures, presented in tabular form and were discussed. After the non-lattice beam, the lowest specific deformation occurred in the triangular lattice beam. Therefore, the triangular lattice structure gave promising results for structural elements in pure bending state.
dc.description.sponsorshipBayburt University
dc.identifier.doi10.55117/bufbd.1442014
dc.identifier.endpage46
dc.identifier.issn2667-579X
dc.identifier.issue1
dc.identifier.startpage35
dc.identifier.urihttps://hdl.handle.net/20.500.14034/2699
dc.identifier.urihttps://doi.org/10.55117/bufbd.1442014
dc.identifier.volume7
dc.language.isoen
dc.publisherBayburt Üniversitesi
dc.relation.ispartofBayburt Üniversitesi Fen Bilimleri Dergisi
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_DergiPark_20250319
dc.subjectAnkastre Kiriş
dc.subjectSistem Tanımlama
dc.subjectModal Analiz
dc.subjectStatik Yapısal Analiz
dc.subjectTitreşim Modeli
dc.subjectKafes Yapılar
dc.titleKafes yapılı konsol kirişin yapısal kullanımına yönelik ilk adımlar: System identification, modal ve yapısal analiz
dc.title.alternativeFirst steps towards structural utilisation of the lattice-structured cantilever beam: System identification, modal and static structural analysis
dc.typeArticle

Dosyalar