Development of a new model for determine of cutting parameters in metal drilling processes

Basit Öğe Kaydı
dc.authoridGok, Kadir / 0000-0001-5736-1884
dc.authorscopusid36652070800
dc.authorscopusid56414418900
dc.authorscopusid23477095600
dc.authorscopusid55420965900
dc.authorwosidGOK, Arif/ABC-4777-2020
dc.contributor.authorTurkes, Erol
dc.contributor.authorErdem, Mehmet
dc.contributor.authorGök, Kadir
dc.contributor.authorGök, Arif
dc.date.accessioned2022-02-15T16:58:48Z
dc.date.available2022-02-15T16:58:48Z
dc.date.issued2020
dc.departmentBakırçay Üniversitesien_US
dc.description.abstractMetal drilling and cutting processes are used commonly in many areas of the industry. When these processes investigated analytically, it is seen that they have a very complicated structure. This complicated structure can find easy solutions with finite element-based simulation tools. In metal removal operations, it is very difficult to calculate the cutting parameters such as cutting tool stresses, residual stresses, cutting tool-chip interface temperature and shear angle both experimentally and analytically. But, these operations could be easily calculated by computer-supported simulation tools. In these types of numeric simulations, using finite element method, it is needed to identify clearly the friction, material model load and limiting conditions. In this paper, the cutting parameters as cutting and thrust power, heat transfer coefficient and friction coefficient at chip-tool interface which is needed to find the temperature distribution on drilling bit and workpiece material were calculated using analytic models.en_US
dc.identifier.doi10.1007/s40430-020-2257-y
dc.identifier.issn1678-5878
dc.identifier.issn1806-3691
dc.identifier.issue4en_US
dc.identifier.scopus2-s2.0-85081723536en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.urihttps://doi.org/10.1007/s40430-020-2257-y
dc.identifier.urihttps://hdl.handle.net/20.500.14034/469
dc.identifier.volume42en_US
dc.identifier.wosWOS:000520482900001en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringer Heidelbergen_US
dc.relation.journalJournal Of The Brazilian Society Of Mechanical Sciences And Engineeringen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectMetal drillingen_US
dc.subjectFinite element methoden_US
dc.subjectHeat transfer coefficienten_US
dc.subjectCutting parametersen_US
dc.subjectVisual basic softwareen_US
dc.subjectFinite-Element Modelen_US
dc.subjectToolen_US
dc.subjectSimulationen_US
dc.subjectEnergyen_US
dc.titleDevelopment of a new model for determine of cutting parameters in metal drilling processesen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
Development of a new model for determine of cutting parameters in metal drilling processes.pdf
Boyut:
4.27 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Biyomedikal Mühendisliği Bölümü Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu